Connecting A Digital Audio System; Connecting An Amplifier/Dvd Home Theater - Analog - Samsung HL-T5656W Instrucciones Del Propietario

Connecting a Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1 Connect an Optical Cable
between the DIGITAL AUDIO OUT
(OPTICAL) jack on the TV and
the Digital Audio Input jack on the
Digital Audio System.
When a Digital Audio System is
connected to the DIGITAL AUDIO
OUT (OPTICAL) terminal:
Decrease the volume of the TV,
and adjust the volume level with
the audio system's volume control.
➢ Each Digital Audio System has a
different panel configuration.
➢ 5.1CH audio is possible when the
TV is connected to an external
device supporting 5.1CH.
What is OPTICAL?
● Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of
digital audio in the form of a light wave that uses a glass conductor.
Connecting an Amplifier/DVD Home Theater - Analog
1 Connect Audio Cables between
the AV OUT [L-AUDIO-R] jacks on
the TV and AUDIO IN [L-AUDIO-R]
jacks on the Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the AV OUT
[L-AUDIO-R] terminals: Decrease
the volume of the TV, and adjust
the volume level with the amplifier's
volume control.
➢ Each Amplifier/DVD Home Theater
has a different panel configuration.
➢ When connecting an Amplifier/DVD
Home Theater, match the color
of the connection terminal to the
cable.
Digital Audio System
Optical Cable (Not supplied)
1
Amplifier/
DVD Home Theater
Audio Cable (Not supplied)
1
English - 16
TV Rear Panel
TV Rear Panel