Setting The Default Channel List Mode; Fine Tuning Analog Channels - Analog - Samsung HL-T5656W Instrucciones Del Propietario

Setting the Default Channel List Mode

You can set All, Added, or Favorite to be the Default List that appears when you press the CH LIST button.
1 Press the MENU button.
Press the ◄ or ► button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
2 Press the ▲ or ▼ button to select Default List Mode, then press the ENTER button.
Press the ▲ or ▼ button to select All, Added, or Favorite, then press the ENTER button.
Press the EXIT button to exit.
➢ The channel list you want to appear when you press the CH LIST button.
 All: Shows All the channels when you press the CH LIST button on the remote
control.
 Added: Shows Added channels when you press CH LIST button on the remote
control.
 Favorite: Shows Favorite channels when you press CH LIST button on the remote
control.
Press the CH LIST button on the remote control to bring up the channel lists.

Fine Tuning Analog Channels - Analog

Use fine tuning to manually adjust a particular channel for optimal reception.
1 Press the MENU button.
Press the ◄ or ► button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Fine Tune, then press the ENTER button.
2 Press the ▲ or ▼ button. Press the ◄ or ► button to adjust the fine tuning.
3 To store the fine tuning setting in the TV's memory, press the ENTER button.
4 To reset the fine tuning setting, press the ▲ or ▼ button to select Reset, then press the
ENTER button.
Press the ▲ or ▼ button to select OK or Cancel, then press the ENTER button.
Press the EXIT button to exit.
➢ Only analog TV channels can be fine tuned.
➢ "" will appear next to the number of fine-tuned channels.
English - 42