Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Section
03
Operating this unit
Entertainment settings
1
Display the entertainment menu.
Refer to Basic menu operations on page 9.
2
Turn M.C. to select the entertainment
function.
After selecting, perform the following proce-
dures to set the entertainment function.
Background (background display setting)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
BGP1 (background picture 1)—BGP2 (back-
ground picture 2)—BGP3 (background picture 3)
—BGV (background visual)—Photo (photo)—
SPEANA (spectrum analyzer)—Off (display off)
3 Press M.C. to confirm the selection.
Clock (entertainment clock)
1 Press M.C. to turn entertainment clock display on
or off.
If the setting is on, it is automatically switched to
entertainment clock display.
Slide Show (slide show viewing)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the external storage device.
USB (USB storage device)—SD (SD memory card)
Slideshow will start.
Appearance (screen/illumination color)
1 Press M.C. to display the setting mode.
2 Turn M.C. to change the desired screen/illumina-
tion color. Press to select.
Screen (screen color)—Illumi (Illumination color)
—Color Setting (customizing color)
For details on Color Setting (customizing color),
refer to Customizing the illumination color on this
page.
3 Turn M.C. to change the desired illumination
color. Press to select.
The illumination color changes at a
regular interval.
The customized color is set as the il-
lumination color.
28
En
Notes
! If SPEANA (spectrum analyzer) is selected,
the spectrum analyzer will be displayed in-
stead of Source image display or Artwork dis-
play.
! If you select USB, SD as the source, you can-
not select Slide Show.
Customizing the illumination color
1
Use M.C. to select Color Setting in the
Appearance (Illumination color).
Refer to Appearance (screen/illumination
color) on this page.
2
Use M.C. to customize the color.
Turn for fine tuning. Push left or right to adjust
the next color.
3
Press M.C. to store the customized color
in the memory.
The illumination color will be switched to the
customized color.
Publicidad
Capítulos
Tabla de contenido
