Descriptions And Features; Subdrive, Monodrive, And Inline Models - Franklin Electric SubDrive Duplex Alternator Manual Del Usuario

SubDrive Duplex Alternator
Table 1: SubDrive and MonoDrive Models
Model
Name
SubDrive Duplex
Alternator
Note: SubDrive Duplex Alternator will work with any combination of the listed
Franklin Electric SubDrives/MonoDrives .

Descriptions and Features

The Franklin Electric SubDrive Duplex Alternator allows for two Franklin Electric
SubDrive units to operate on the same water system and share the work load
equally. The alternator will alternate between the two SubDrive units when the
defined amount of run time has been reached. The alternator is specifically
designed for use with Franklin Electric SubDrive products (see Table 1 above).
Key features of the alternator include the following:
• Works with entire SubDrive
product family
• Selectable alternate timing
• Pump status indicator lights
• Fault detection
• Fail safe operation
2
Part
Number
5850012000
Use with
SubDrive Series
5870203380 SubDrive75 NEMA 1
5870203384 SubDrive75 NEMA 4
5870204100 SubDrive100 NEMA 1
5870204104 SubDrive100 NEMA 4
5870204150 SubDrive150 NEMA 1
5870204154 SubDrive150 NEMA 4
5870206300 SubDrive300 NEMA 4
5870205103 SubDrive15 NEMA 3R
5870205303 SubDrive20 NEMA 3R
5870205403 SubDrive30 NEMA 3R
5870205003 MonoDrive NEMA 3R
5870205203 MonoDriveXT NEMA 3R
5870203223 SubDrive2W NEMA 3R
5870203110 MonoDrive NEMA 1
5870203114 MonoDrive NEMA 4
5870204110 MonoDriveXT NEMA 1
5870204114 MonoDriveXT NEMA 4
90401101 Inline 1100
90411101 Inline CP
• Manual override push-button
• Alarm circuit contacts
• NEMA 4 enclosure
• Low voltage wiring connections