Publicidad
Idiomas disponibles
Idiomas disponibles
JBL SYNTHESIS SDA8300 / SDA4600 QUICKSTART
SDA4600 Factory Default Configuration 1 (600 x 4)
CONFIGURATION 1
SUBWOOFER 1
SUBWOOFER 2
SUBWOOFER 3
SUBWOOFER 4
SDA4600 Configuration 2 (1200 x 2)
CONFIGURATION 2
SUBWOOFER 1
SUBWOOFER 2
SDA4600 Configuration 3 (1200 x 2)
CONFIGURATION 3
SUBWOOFER 3
SUBWOOFER 4
For low impedance loads, select the appropriate size of wire based on
the distance from amplifier to speaker
Distance
UP to 25 ft. (7.6 m)
26-40 ft. (7.9-12.2 m)
41-60 ft. (12.5-18.3 m)
> 60 ft. (18.3 m)
CAUTION: Never use shielded cable for output wiring.
CAUTION: Never connect the speaker return to the chassis of the amplifier, or damage to the amplifier
may result.
NOTE: Custom wiring should only be performed by qualified personnel. Class 2 output wiring is
required.
CAUTION: To prevent electric shock, do not remove covers. No user serviceable parts inside. Refer
servicing to a qualified technician.
4 |
J B L S y n t h e s i s S D A A m p l i f i e r Q u i c k S t a r t G u i d e
AMP CHANNEL
1
2
3
4
AMP CHANNEL
1 + [POSITIVE]
2 + [NEGATIVE]
3 + [POSITIVE]
4 + [NEGATIVE]
AMP CHANNEL
1 + [POSITIVE]
2 + [NEGATIVE]
3 + [POSITIVE]
4 + [NEGATIVE]
Wire Size
16 AWG
14 AWG
12 AWG
10 AWG
Configuration
4 channel subwoofer speaker system
Configuration 2
Bridged Subwoofer speaker system (ch1 - ch2)
Configuration 3
Bridged Subwoofer speaker system (ch3 - ch4)
Publicidad
