Graco 4EVER Instrucciones De Uso página 43

7. Tighten the Vehicle Seat Belt
Press down firmly in the center of the car
seat. Pull on the shoulder belt to tighten
while feeding the slack back in the retractor.
8. Test For Tightness
Grab the sides of the seat where the vehicle
seat belt is and slide the car seat side-to-
side and front-to-back.
If the seat moves less than 1" (2.5 cm), it is
tight enough.
9. Check the Level Indicator
Vehicle MUST be on level ground.
Check the level indicator on the car seat.
The bubble must be completely within
the blue zone. Readjust if needed.
See section 6-A to secure your child.
Recheck the level indicator with child in seat.
43