5. Place Car Seat Rear-Facing in Back
Seat of the Vehicle
Place rear-facing in vehicle seat and center
the car seat between the lower LATCH
anchors. The base should sit as flat as
possible on the vehicle seat.
6. Extend the LATCH Strap.
For easier installation, extend the LATCH
strap to its maximum length by pressing the
grey button and pulling on the strap.
7. Check the Level Indicator
Vehicle MUST be on level ground.
Check the level indicator on the car seat.
The bubble must be completely within
the blue zone.
Adjust the recline until the bubble is
completely within the blue zone.
36