Troubleshooting - Troy-Bilt Super Bronco Manual Del Operador

Troubleshooting

Problem
Excessive vibration
Uneven cut
Cause
1. Cutting blade loose.
2. Damaged, unbalanced or bent cutting blade.
1. Deck not leveled properly.
2. Dull or damaged blade.
3. Uneven tire pressure.
Remedy
1. Tighten blade and spindle.
2. Replace blade.
1. Perform side-to-side deck adjustment.
2. Sharpen or replace blade.
3. Check and correct tire pressure in all four
tires.
8
31