Programme Edit - Changhong LED32E2200ST2 Manual Del Usuario

Menu Operation
When motor is set to DiSEqC1.2 :
-Set Limit: Press the red button to set Limits to the scope of satellite Antenna
rotation.
•Move Continue: Rotates the antenna until the rotation has been completed or
stopped manually.
•Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a fine Adjustment.
•Set West Limit: Set the west limit value.
•Set East Limit: Set the East limit value.
•Goto Reference: Drive antenna to zero position.
•Disable Limit: Delete Limit settings. Allows the antenna to rotate over the full arc.
Cancel east limit and west limit.
- Set position: Press the yellow button to set position.
•Move Auto: Rotates the antenna automatically.
•Move Continue: Rotates the antenna until the rotation has been completed or
stopped manually.
•Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a finer adjustment.
•Store Position: Store current position as the selected positioner limit.
•Goto Position: Rotates the antenna to the stored satellite position.
•Goto Reference: Drive antenna to zero position.
When Motor is set to DiSEqC1.3 :
-Set Location: Press the green button to set Location .
•Location: Manual,Abuzaby,Alger,Beirut,Berlin,Budapest,Cairo,Casablanka,ect.
can be adjusted When the Location is set to Manual.
•Longitude Direction: Sets the Longitude direction for the location.
•Longitude Angle: Sets the Longitude angle for the location.
•Latitude Direction: Sets the Latitude direction for the location.
•Latitude Angle: Sets the Latitude angle for the location.

■ Programme Edit

Press the▲/▼ buttons select the Programme Edit, then
press the ENTER button to enter sub-menu.
First press the▲/▼buttons to highlight the channel you
want to delete, skip, rename or move, then:
Press the RED button to delete the channel.
Press the GREEN button to rename the channel. (In ATV mode)
Press the YELLOW button to set the channel to moving
state, then press the ▲/▼buttons to move it to the position
you want to put.
Press the BLUE button to skip the select channel. (Your TV
set will skip the channel automatically when using CH+/- to view the channels.)
Press the button to set the favorite channel.
18