VOLTOMAT HEATING FH-107760.1 Manual Del Usuario página 33

FH-107760.1
PARTS DESCRIPTION
1. Thermostat control switch
2. Air outlet grille
3. Heat select switch
4. Indicator light
5. Handle
Heat setting:
- Low heat output = 1000W (press one heat switch)
- High heat output = 2000W (press both heat switches)
OPERTAION
1. Press the heat select switch to choose the suitable setting (low heat output = 1000W / high heat output =
2000W).
2. Turn the thermostat knob in a clockwise direction to the max position.
3. Once the room temperature has reached the desired value, turn the thermostat knob slowly in
anti-clockwise direction until you hear a "click" sound; this is the setting temperature.
4. The appliance will automatically maintain the setting temperature. It will switch on when the room
temperature is below the setting, and switch off if it is above the setting.
Note: if you do not choose the heat setting and only rotate the thermostat knob to the max position, the
appliance will have the fan function only (no heat).
SAFETY SYSTEM
The appliance has a safety system which automatically switches off the unit when overheated.

If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for

at least 30 minutes. Put the plug in the socket and switch on the heater.
MAINTENANCE
The fan heater only needs regular cleaning on the outside.

Before you clean the unit, turn off the switch. Remove the plug form the socket and wait until the fan

heater cools down completely.
Use a damp cloth to wipe the heater housing.

Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the

appliance.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 1800-2000W
GBR