Storage; Disposal And Recycling - EINHELL BT-VT 100 Manual De Instrucciones

Transformador de tensión
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Anleitung_BT_VT_100_SPK7:_
8.2 Maintenance
There are no parts inside the appliance which require
additional maintenance.
8.3 Changing the fuse for a 12 V plug
If the voltage transformer is overloaded, the 15 A
fuse, which is integrated in the 12 V cigarette lighter
plug, will melt. Unscrew the plug prongs and replace
the faulty fuse with a fuse of the same type. Screw the
prongs back onto the plug. Determine the cause
which led to overload of the voltage transformer.
Note: A replacement fuse can be obtained from a
specialist car component dealer
8.4 Ordering replacement parts
Please provide the following information on all orders
for spare parts:
Model/type of the appliance
Article number of the appliance
ID number of the appliance
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info

9. Storage

The appliance should be stored in a dry place and
covered, if possible.

10. Disposal and recycling

The appliance is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
recycled. The appliance and its accessories are
made of various types of material, such as metal and
plastic. Defective components must be disposed of
as special waste. Ask your dealer or your local
council.
04.06.2009
13:25 Uhr
Seite 15
GB
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

0101920.690.30

Tabla de contenido