Weka TR40 ANNA Instrucciones De Servicio página 35

UPDATE
After initiating the update process by pressing
within which the user can connect to the converter utilizing the „WEKA Service App" (see
additional information below) and if necessary apply a firmware update. The user will be
guided through the process with information on the display of the converter as well as on
the app. This part of the process can be aborted without risk at any time by pressing
already downloaded data will be refused and the process will start from the beginning once
the user has initiated it again. In case the update process fails please contact WEKA, we
can help you to restore the converters firmware.
LANGUAGE All of the listed languages can be set as the default language of the converter. The list of
available languages will be extended from time to time and can be updated using the
update feature. By pressing
be stored as default language.
BRIGHTNESS By changing the backlight brightness the readability of the display can be adopted to many
situations. Even in case of direct sunlight the display will remain its high contrast due to its
ability to use the sun as light source. By pressing
and by long pressing
CURRENT In single phase operation mode the maximum input current can be reduced to 15A or even
10A. By doing so it is possible to operate a machine even if the mains supply is weak or an
inadequate generator is used. By pressing
long pressing
be indicated by the symbol
TIME The integrated real time clock provides the possibility to keep track of the daily usage of the
converter. The format of time and date can be adjusted according the specification of the
country. By pressing
they can be changed. Once the format of time or date has been changed it will be stored by
long pressing
DEBUG The readout of real time data (for example motor frequency, mains frequency, intermediate
voltage, motor current, ...) provides additional information for troubleshooting in case of
error or malfunction. This menu item is mainly dedicated to a service technician.
DEVICE INFO An overview of device specific settings and version numbers helps to identify internal
components and the overall condition of the converter. This is especially helpful for the
service technician to evaluate if an update may be necessary.
ARCHIVE Once an error message shows up simultaneously a copy of this error including the time
stamp will be stored. By doing so it is possible to insight the history of the converter at a
later time. By long pressing
COUNTER The operational time of the converter is logged in different ways:
- „OT total" shows the total amount of operational time since first start-up of the converter
- „OT today" show the operational time of the current day
- „OT user" can be reset by long pressing
keep track of the operational time within a certain time interval.
- „STC" show the elapsed time since the converter has been at a service station for
inspection last time.
Additional information about the Bluetooth update:
- To perform an update a Bluetooth compatible smartphone or tablet running android 4.4.2 or
higher is necessary. Apple products are not supported at this moment.
- A connection to the internet is necessary. The update consumes about 500kB of data traffic.
Therefore make sure to have enough data traffic available. The data connection speed should be
at least EDGE or faster. WiFi connections will also work.
- The WEKA Service App can be downloaded from the Google Playstore (search term "WEKA
Service App") or simply use following QR-code or direct link to navigate directly to the Google
Playstore:
a language can be selected and by long pressing
it will be stored.
it will be saved. Once the converter is set to a reduced input current it will
or in the header of the display.
the individual values can be selected and by pressing
.
the content of the error storage will be cleared.
31
an adequate time frame will be opened
the brightness level can be changed
the current setting can be changed and by
. This enables for example hire companies to
,
it will
and