Satellite Receiver - HP IBB5220N Guia Del Usuario

• If your cable box has different connectors than those shown, use the highest-quality video connection
available. Observe the color-coding on all connectors.
• For digital cable, your set-top cable box (STB) might require a special splitter. Contact your cable provider for
information. Or you can omit the splitter and omit the connection to the television cable input.
• If all cable channels are scrambled, connect the incoming cable directly to the cable box (omit the splitter and
omit the connection to the television cable input).
• You can eliminate the cable box if your cable provider can install a CableCARD module in the television. See
"Installing a CableCARD Module" on page 19.
To do this...
Watch cable channels
Scan for available channels
Connect additional equipment

Satellite Receiver

If you have a satellite receiver (SAT) without a VCR or personal digital video recorder (DVR), you can connect it as
shown.
NOTE: If your device has different connectors than those shown, use the highest-quality video connection
available. Observe the color-coding on all connectors.
To do this...
Watch satellite channels
12
Setting Up the Television
Do this...
Press Source and select Component 1
See "Finding Your Available Channels" on page 21.
"Connecting Your Other Equipment" on page 9
Satellite Out
Y L
AUDIO
PB R DVI
PR VIDEO
S-Video
HDTV DIGITAL
Satellite In
AUDIO
OUT
Do this...
Press Source and select Component 1
Antenna in
Phone
Data
Jack