Audio: Surround Sound Or Av Receiver - HP IBB5220N Guia Del Usuario

NOTE:
• Observe the color-coding on all connectors.
• You can disable the television speakers and listen to only the stereo speakers.
• The volume buttons on the television remote control normally adjust the television volume. This means you
do not have to adjust the volume on the stereo system.
To do this...
Change the volume
Disable the television speakers

Audio: Surround Sound or AV Receiver

If you have a 5.1 surround sound system or audio-video receiver, you can connect its audio to your television as
shown. You also can connect other equipment to the sound system.
• The digital audio output on the television sends Dolby Digital surround sound only when you are viewing a
source connected to an antenna, cable, or HDMI input, and only if the program contains surround sound.
Otherwise, the digital audio output sends digital stereo sound.
• Other devices with digital audio outputs can be connected directly to the surround sound system so you can
hear surround sound. You can omit the audio connections to the television for those devices.
• Devices with only stereo outputs can be connected directly to the surround sound system or to the television.
• If the AV receiver also supports multiple video connections, you can connect video outputs from other
equipment to that device, and then connect the video output from the receiver to the television. Use the
highest-quality video connections available.
To do this...
Change the volume.
Disable television speakers.
Do this...
Press the volume buttons on the stereo system
Press Menu and go to Sound > Internal Speakers
Do this...
Press the volume button on the remote
Press Menu and go to Sound > Internal Speakers
SUB
SPEAKERS
17
Setting Up the Television