Selecting A Video Source; Using Dual Picture Mode - HP IBB5220N Guia Del Usuario

Selecting a Video Source

• To choose from a list of sources, press Source, use the
arrows to select the source, then press OK.
• To display information about the current source, press
Info.

Using Dual Picture Mode

NOTE: To use dual picture mode, one of the pictures must be from HDMI 1 or HDMI 2.
1. Press Menu. Use the arrow buttons to select the Source menu. Use the arrow buttons to select Dual picture
and press OK.
2. Use the arrow buttons to select Dual mode. Then use the right arrow to select PIP or Side-by-side.
3. Press the down arrow, then use the right arrow to select the source. If you are using the PIP mode, use the
arrow buttons to specify the size and layout for the second picture.
To do this...
Find the active picture
Change the size of the active picture (PIP)
Move the border to the other picture and play its
sound
Move an overlapping picture (PIP)
Show only the active picture (end two pictures)
32
Watching Television
Do this...
Use the left and right arrows or OK on the remote
control when no border is visible
Use the up and down arrows on the remote control
Use the left and right arrows on the remote control
Press Menu, then go to Source > Dual picture >
Layout
Press Menu, then go to Source > Dual picture >
Dual mode