Safety - PLYMOVENT Multidust bank BM-2 Instrucciones Para El Uso

3

SaFEty

Important safety instructions
Before using the MDB the user must be given instructions
about its use in the form of information, instructions and
training, and must be advised of the hazards associated with
the materials that will be used.
Please read instructions before installing and using the
control box. This will help you obtain the full benefit from the
control box you have selected.
A Read the Owner's Manual and Important Safety
Instructions carefully. Failure to follow these instructions
could cause a malfunction in the system or unsatisfactory
service.
B Follow a regular service and maintenance schedule for
efficient operation.
To reduce the risk of electric shock, fire and injury to
persons:
• Do not use the control box in wet or damp locations.
• Do not use the control box outdoors.
general
The manufacturer does not accept any liability for damage to
the product or personal injury caused by ignoring of the
safety instructions in this manual, or by negligence during
installation, use, maintenance, and repair of the product
mentioned on the cover of this document and any
corresponding accessories. Specific working conditions or
used accessories may require additional safety instructions.
Immediately contact your supplier if you detect a potential
danger when using the product.
The user of the product is always fully responsible for
observing the local safety instructions and regulations.
Observe all applicable safety instructions and
regulations.
user manual
- Everyone working on or with the product, must be familiar
with the contents of this manual and must strictly observe
the instructions therein. The management should instruct
the personnel in accordance with the manual and observe
all instructions and directions given.
- Never change the order of the steps to perform.
- Always keep the manual with the product.
Pictograms and instructions on the product (if
present)
- The pictograms, warning and instructions attached to the
product are part of the safety features. They must not be
covered or removed and must be present and legible
during the entire life of the product.
- Immediately replace or repair damaged or illegible
pictograms, warnings and instructions.
users
The use of this product is exclusively reserved to authorized,
well-trained and qualified users. Temporary personnel and
personnel in training can only use the product under
supervision and responsibility of skilled engineers.
0000100513/011212/0 MDB
intended use
1
The product has been designed as a filtration unit for dry
dust and fumes. Using the product for other purposes is
considered contrary to its intended use. The manufacturer
accepts no liability for any damages or injury resulting from
such use. The product has been built in accordance with
state-of-the-art standards and recognized safety regulations.
Only use this product when in technical perfect condition in
accordance with its intended use and the instructions
explained in the user manual.
Restrictions
The Plymovent "BANK" system may only be used for filtration
of fumes and dust generated by some dry processing
industries. Max 80°C (176°F) gas temperature.
Technical specifications
The specifications given in this manual must not be altered.
Modifications
Modifications of (parts of) the product is not allowed.
It should be noted that the welding current return circuit
between the work piece and welding machine has only a
low resistance. Connection between the work piece and
MultiDust Bank should therefore be avoided, so that there
is no possibility of the welding current flowing back to the
welding machine via the protective earth conductor of the
MultiDust Bank.
waRNiNg!
ELECTROCUTION HAZARD.
Disconnect mains before servicing. Failure to do so
could result in serious personal injury or death.
waRNiNg!
Do not attempt installation of this unit unless you
are familiar with the necessary tools, equipment,
utility connections and potential hazards.
Installation should be performed only by a
qualified service provider. Failure to do so could
result in reduced performance of the unit, serious
personal injury or death.
waRNiNg!
PRODUCT MAY CONTAIN SHARP EDGES
Use care when servicing unit.
Failure to do so could result in minor personal
injury.
waRNiNg!
Fire hazard! Important warning to prevent fire.
Never use the product for:
- extracting and/or filtering flammable, glowing or
burning particles or solids or liquids
- extracting and/or filtering of aggressive fumes
(such as hydrochloric acid) or sharp particles
extracting and/or filtering dust particles which
are released when welding surfaces treated with
primer
- sucking cigarettes, cigars, oiled tissues, and
other burning particles, objects, and acids
1
"Intended use" as explained in EN-ISO 12100 is the use for which
the technical product is suited as specified by the manufacturer,
inclusive of his directions in the sales brochure. In case of doubt it
is the use which can be deduced from the construction, the model
and the function of the technical product which is considered
normal use. Operating the machine within the limits of its intended
use also involves observing the instructions in the user manual.
10
0