Use; Cleaning And Maintenance; Problems And Solutions - Imetec I3701 Instrucciones De Uso

Proceed as follows once the installation is complete:
• Insert the plug into the socket.
• Activate the appliance by rotating the speed knob (11) to position 1 or 2.
• Insert the fruit or vegetables into the opening of the lid (2).
• Press the fruit or vegetables with the food pusher (1) [Fig. H].
• Once pressed, turn the appliance off by rotating the speed knob (11) to position 0.
• Remove the plug from the socket.
• Wait for the stainless steel filter (4) to stop completely before opening the safety handle
(7).
• Pour the juice into a glass.
After having used the appliance, it must be immediately cleaned in order to prevent the food
from clogging the stainless steel filter (4) once it dries.
• Remove the plug from the socket.
• Wait for the stainless steel filter (4) to stop completely before opening the safety handle
(7).
• Wash the removable parts: food pusher (1), lid (3), juice chute (5), juice container (8),
froth separator (9) and the pulp container (12) by hand or in the dishwasher.
• Make sure the maximum water temperature in the dishwasher does not exceed 60°C.
• The stainless steel filter (4) is only to be washed by hand, under running water, using a
brush normally used for dishes.
• Clean the motor unit (10) with a well-wrung moist sponge.
Should one of the problems indicated occur, adopt the proposed solution:
The appliance does not work.
The juice is not dispensed properly.
The stainless steel filter (4) is not easily
cleaned.
The juice chute (5), the lid (3) and the food
pusher (1) are stained.

CLEANING AND MAINTENANCE

PROBLEMS AND SOLUTIONS

Problem

USE

Verify that the safety handle (7) is
inserted correctly [Fig. F].
Verify that the stainless steel filter (4) is
not clogged. If so, clean it.
Place it in hot water with dishwashing
liquid for 10 minutes before cleaning it.
Any stains are due to the carotenoids or
colour in fruit and vegetables and do not
constitute a manufacturing defect.
Solution
GB
11