Pre-Operation Checks; Engine Oil Capacity - Honda UMR435T Manual Del Propietário

5. PRE-OPERATION CHECKS

For safe and efficient trimming, always make a pre-operation inspection
before operating:
Perform a pre-operation inspection on a firm, level surface with the
engine stopped and make sure that the engine switch is in the OFF
position.
1.Check the engine oil level
CAUTION:
Running the engine with low oil level will cause serious engine
damage.
1.Place the grass/weed trimmer on a level surface and remove the oil
filler cap.
2.Check the oil level: it should reach to the edge of the oil filler neck,
and check the engine oil for contamination and deterioration.
3.If the oil level is low, fill to the edge of the oil filler neck with the
recommended oil.
If the oil is contaminated or deteriorated, replace it (see page 46).
4.Install the oil filler cap.
Every 10 hours, check the engine oil level and replenish oil up to the
top of the oil filler neck if the engine is operated for more than 10 hours
continuously.
ENGINE OIL CAPACITY: 0.10 L (0.11 US qt, 0.09 lmp qt)
OIL FILLER NECK
UPPER OIL LIMIT
22
UPPER OIL LIMIT
ENGINE OIL
FILLER CAP