Honda UMR435T Manual Del Propietário página 32

5.Operate the throttle system several times and check it has the free
play (i.e. throttle lever does not move while operating the throttle
trigger).
• Holding the flexible shaft and gear case between the clutch case and
cutting head in line with each other, check the throttle trigger for
function (see page 21).
• Return the flexible shaft in the position of the step 3, and check there
is the free play.
• Check the throttle trigger operates smoothly and always spring back
to the idle position.
If there is any abnormality, the throttle system must be serviced.
Consult with your authorized Honda dealer.
5.Check the waist harness latch
• Push the tabs of the waist
harness latch with your fingers
and check that the latch
separates into the left and right
parts.
• After separating the waist
harness latch into the left and
right parts, check the latch for
cracks, breakage and other
damage.
After check, latch the waist
harness latch until it clicks. Before
latching, be sure to check the
surface side and reverse side of
the latch not to twist the waist
harness.
If the latch does not separate, it
must be repaired. If the latch is
damaged, it must be replaced.
Consult with your authorized
Honda dealer.
THROTTLE TRIGGER
Push the latch tab from both sides.
WAIST HARNESS LATCH
LATCH TABS
This will unbuckle and release the latch.
LATCH TABS
29