Honda UMR435T Manual Del Propietário página 36

8.Check the flexible shaft
• Check the outer surface of
flexible shaft for cut, cracks,
shave, discoloration,
deformation and other damage.
The flexible shaft must be
replaced if it is damaged,
discolored or deformed.
Consult with your authorized
Honda dealer.
• Move the engine side flexible
shaft installation part back and
forth and check that the travel
is 5 mm (0.2 in)or below. The
flexible shaft must be serviced
if the travel exceeds 5 mm (0.2
in). Consult with your
authorized Honda dealer. (See
page 57 for flexible shaft
inspection/lubrication.)
9.Check all bolts and nuts
1.Check each bolt and nut for looseness. Tighten them securely if
necessary.
2.Check the handle for loose mounting bolts or screws, and tighten
them securely if necessary.
LOOP HANDLE
HANDLE MOUNTING SCREWS (4)
FLEXIBLE SHAFT
ENGINE SIDE FLEXIBLE SHAFT
INSTALLATION PART
THROTTLE ASSEMBLY
33