Brandt BDVDP49 Manual De Uso página 18

ZOOM
1. Press ZOOM ZOOM ZOOM on the remote.
2. Press or
3. When the picture is enlarged, press
ZOOM ZOOM
4. Press ZOOM ZOOM again to exit.
To rotate a picture:
Press during play to rotate the picture clockwise or
counter-clockwise or have an invert or mirror picture.
DIGITAL CARD AND
DIGITAL DIGITAL DIGITAL CARD CARD CARD AND AND AND USB
Digital cards (SD/MMC/MS card) and USB with mp3&pictures (.jpg)
may be played and displayed through the unit. Digital cards may be
directly inserted through the card reader slot. The USB socket can be
used to supply signals to the unit from USB sources.
1. Switch the unit on.
2. Insert a USB cable (not supplied) into the USB port or a card into the
card reader slot on the side of the unit.
SOURCE SOURCE
3. Press SOURCE SOURCE
ENTER ENTER
4. Press ENTER ENTER twice and
USB/CARD.
5. If USB/CARD is selected, the unit will begin to read the card or USB
connected to it.
SETUP SETUP MENU MENU
SETUP SETUP MENU MENU
General General Operation Operation
General General Operation Operation
SETUP SETUP
1. Press SETUP SETUP to enter the setup menu.
2. Press to enter the submenu or return to the previous menu.
3. Press ▲▼ to highlight the desired menu.
4. Press to enter the next level of submenu or confirm your
selection.
5. To exit from the menu, press SETUP
repeatedly to zoom in and out.
USB PLAY
USB USB PLAY PLAY PLAY
and then press
the unit would automatically detect the
SETUP SETUP
SETUP again. The settings will be
to pan through it.
to highlight "Media".
17