Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
PLEASE TAKE INVENTORY
Please check to ensure you have everything in your Polk Audio
SurroundBar
®
400 Component Home Theater (CHT) or your
SurroundBar 500 CHT carton. Inside, you should find:
SURROUNDBAR 400 CHT:
SurroundBar 400 loudspeaker
Wall mount bracket
15' (4.6m) color-coded cable
2 rubber feet
Owner's manual
Online registration card
SURROUNDBAR 500 CHT:
SurroundBar 500 loudspeaker
SDA control module
SDA control module wall mount template
Rack mount ears with screws
Wall mount bracket
15' (4.6m) cable
2 rubber feet
Owner's manual
Online registration card
Important Note: If anything is missing or damaged, or if your
Polk Audio SurroundBar CHT system fails to operate, please
notify your dealer immediately. We recommend keeping your
original carton and packing materials in case you need to ship
the unit in the future.
ABOUT YOUR SURROUNDBAR CHT
Thank you for choosing the SurroundBar CHT from Polk Audio.
You're about to discover how the legendary Polk Audio sound
makes watching TV and movies so much more exciting. The
SurroundBar CHT produces a wide soundstage and rich, full
sound without the need for rear speakers and the clutter
of rear speaker wires.
INSIDE YOUR SURROUNDBAR CHT CARTONS:
®
SURROUNDBAR 400 CHT:
Wall Mount Bracket
SURROUNDBAR 500 CHT:
Wall Mount Bracket
Screw location for horizontal mounting
Position de la vis pour montage horizontal
Screw location for vertical mounting
Position de la vis pour montage vertical
SDA Control Module
Wall Mount Template
Customer Service Hours of Operation: Monday-Friday, 9
SurroundBar 400 Loudspeaker
Rubber Feet
SurroundBar 500 Loudspeaker
Crossover Module Wall Mount Template
Gabarit pour montage mural
de la Crossover Module
1. Determine crossover module location.
2. Hold or tape the template to the mounting location,
1. Déterminez le lieu de montage de crossover module.
either in a vertical or horizontal position.
2. Tenez ou fixez le gabarit à l'endroit choisi—
3. Mark the holes for the keyhole mounting screws
en position verticale ou horizontale.
3. Marquez les trous pour les vis de montage
4. Attach the mounting screws into the wall stud or,
if directly into drywall, by using wall anchors. Leave
des supports en trou de serrure.
enough of the screw exposed so that the keyhole
4. Visez les vis de montage au montant du mur—
slots will rest securely on the screws.
utilisez des ancres si vous visez dans le placoplâtre.
5. Attach the wires to the terminals on the back
Laissez dépasser les vis assez pour que les supports
en trou de serrure s'enclenchent solidement sur les vis.
Screw location for horizontal mounting
of the crossover module (see manual).
Position de la vis pour montage horizontal
6. Mount the module on the wall.
5. Connectez les fils de h.p. aux bornes situées à l'arrière
de crossover module (consultez le manuel).
See manual for different mounting options
6. Montez module au mur.
Consultez le manuel pour diverses options de montage.
Center Point
Screw location for vertical mounting
Point Central
Position de la vis pour montage vertical
Rubber Feet
-5:30
M
PM EST
15' (4.6m) Color-Coded Cable
15' (4.6m) Cable
SDA Control Module
Rack Mount Ears
(Hardware Included)
polkcs@polkaudio.com
3
Publicidad
