Cleaning And Maintenance; Technical Data - HAEGER HP-02W.007A Instrucciones De Uso

Operating Instructions
Make sure that the appliance is in the "0FF" position and then plug it into the mains.
•
Use flat based pots/pans to ensure full contact with the hot plate. The base diameter should be at least equal to the
•
cooking plate.
The hot plates can operate at different temperatures. Turn the knob clockwise to select the heating temperature
•
(from 1~6). Use the lowest temperatures for warming and simmering, and the highest temperatures for boiling.
After use, turn the knob counter clockwise to the point "0FF" and unplug the hot plate.
•
The construction of the hot plate means that a certain amount of residual will remain after it has been switched off,
•
and this can be used for keeping food warm over short periods.

Cleaning and Maintenance

• Make sure that the appliance is unplugged from the mains and cold before attempting to clean it.
• All surfaces can be wiped clean with a damp cloth. Do not use abrasive cleaning products that might damage the
hot plates. Never immerse the appliance in water or any other liquid.

Technical Data

Power supply:........................ 220-240V~, 50 Hz
Power consumption:............ 1500W (HP-01 Series)
Burner diameter.................... Ø 185mm (HP-01 Series)
Instructions for use
2500W (1500W + 1000W) (HP-02 Series)
Ø 155mm (HP-02 Series)
English
4