Saci [e] Winner Manual De Instalación Y Manteniemiento página 34

10 SETUP MENU
10 INPUTS OUTPUTS
Par. Description
10.1 Digital Input 1
10.2 Digital Input 2
10.3 Output 1
10.4 Output 2
11 DISPLAY
Par. Description
11.1 Water filtered today
11.2 Total water pumped
11.3 Energy meters
11.4 Hours of work
11.5 Software version
12 ALARM LOG
Par. Description
12.1 Last alarm triggered
13 RESET
Par. Description
13.1 Reset meters
13.2 Reset alarm log
13.3 Factory settings
VALUES
Units
Default Min.
NOT USED /
EMERGENCY
NOT
STOP /
USED
FLOW SLAVE /
SPEED SLAVE
NOT USED /
EMERGENCY
NOT
STOP /
USED
FLOW SLAVE /
SPEED SLAVE
OFF / ALARM
OFF
/ ON
OFF / ALARM
OFF
/ ON
VALUES
Units
Default Min.
m
3
m
3
kWh
h
VALUES
Units
Default Min.
VALUES
Units
Default Min.
NO NO
NO NO
NO NO
Max.
To connect an external stop or for an
external signal to control the flow rate
or pump speed through the 4-20 mA
input
To connect an external stop or for an ex-
ternal signal to control the flow rate or
pump speed through the 4-20 mA input,
if the input is not previously occupied.
To send pump status signals if it is not
previously occupied
To send pump status signals if it is not
previously occupied
Max.
The water that has moved during the
day in modes that allow filtration
The total of the water that has moved
since the last time the meter was reset
The energy consumed since the last
meter reset
The hours that the pump has worked
since the last meter reset
Version of the unit software
Max.
Records from newest to oldest of the
alarms triggered
Max.
YES To reset the meters of menu 11
YES To reset the alarm log of menu 12
YES Restores the default values
Notes
Notes
Notes
Notes
[e] Winner
35