Nice Way WM080G Instrucciones Y Advertencias Para La Instalación Y El Uso página 5

Single
Mode
Group
Mode
Key to symbols on transmitter display
EN
A B
C D
C
10
Illuminates when the transmitter sends a command.
Illuminates and remains lit during the transmitter programming phases.
Indicates selection of the mode "Single automation" associated with this number (01 - 80).
Indicates selection of the mode "Group automation" associated with this number (01 - 70).
(During installation) Indicates access to Radio Code Programming.
(During installation, within radio code
selected position, i.e. On / Off .
Indicates selection of the command "Sun-On" (Note: the command is sent to the automation and enables the
latter to activate management of the Brightness Sensor - sun).
Indicates selection of the command "Sun-Off" (Note: the command is sent to the automation and enables the
latter to deactivate management of the Brightness Sensor - sun).
Illuminates when the battery is partially discharged.
) The number indicates the selected Dipswitch (01-10), and to the left its
2
EN
etc...
etc...
9