Mersedes-Benz A4708510600 Instrucciones De Servicio página 11

03F018-17_Ladeflächen-Trennsystem_X-Klasse_book.book Seite 9 Freitag, 17. November 2017 3:16 15
Congratulations on your new
Mercedes-Benz load area dividing
system.
These Operating Instructions inform you
about how to use the fitted load area dividing
system for vehicles of the X-Class whilst also
providing you with important instructions
about maintenance and care.
The load area dividing system was installed
by your Mercedes-Benz Service Centre. You
can move it around in the load area or
remove it completely.
The load area dividing system is made up of
two suspending mounts and a separating
board. The load area dividing system divides
up the load area of your vehicle into two
sections.
To avoid danger, it is essential to read these
Operating Instructions before setting off.
Mercedes-Benz is constantly updating its
load area dividing system to the state of the
art and therefore reserves the right to
introduce changes in design, equipment and
technical features. For this reason, you
cannot base any claims on the illustrations or
descriptions in these instructions.
Keep these Operating Instructions together
with the vehicle Operating Instructions.
These Operating Instructions refer to the
vehicle Operating Instructions. Please keep
these at hand for reference.
Should you have any further questions,
please contact a Mercedes-Benz Service
Centre.
Mercedes-Benz Accessories GmbH
A Daimler Company
Introduction
9