Instructions Of Use - Hauck Explorer SL Instrucciones De Montaje

Instructions of use

GB
Delivery contents (Figure1)
1. Setting it up (Figure 2)
Tilt the pram forwards and outwards until you hear and see the two catches
click into place.
2. Fitting the front wheels (Figure 3)
Now the whole front wheel unit can be mounted onto the frame until the metal
stud is completely locked into place. Make sure that the wheels are Þ rmly in
place.
3. Fitting the rear wheels (Figure 4)
Put the wheels onto the ends of the axle until they are Þ rmly in place, and
check that the wheels are Þ rmly in place.
4. Fitting the push-bar
Place the ends of the push-bar onto the frame. When you do this, the two
spring studs must protrude fully and visibly. Check that the push-bar is Þ rmly in
place.
5. Adjusting the height of the push-bar (Figure 5)
Press the adjusting buttons and adjust to the required height.
6. Fitting the folding top (Figure 6)
To Þ t the folding top, put the ends of the folding top into the apertures on the
side of the seat.
7. Fitting the front bracket (Figure 7)
Place the front bracket onto the frame and put it in the required position. If you
want to remove the front bracket, press the safety button and release the front
bracket.
8. Adjusting the leg support (Figure 8)
Press the two adjusting buttons and put into the required position.
9. Adjusting the seat (Figure 9)
Under the head cushion there is an aperture providing access to the backrest
adjustment handle. To adjust the backrest, pull this handle upwards to unlock
the backrest. Now you can set the required position. Release the handle and
move the backrest up or down until you hear it click into place.
10. Braking
To engage the brake, press the brake lever down with your foot. To disengage
the brake, lift the brake lever with your foot.
Caution: always engage the brake when 'parking' the pram.
12