Operations; Setting The Temperature - EASYHOME 95986 Manual Del Usuario

Do not use any distilled or demineralized water or chemical additives.
These substances will hinder the anti-limescale function.
1. Hold the steam iron at a slight angle and lift the water tank lid
(see Fig. B).
2. Use the enclosed measuring cup
water. Make sure you do not fill the water tank passed the MAX mark
(see Fig. C).
3. Close the water tank lid. It will "click" when it is securely closed.
4. Wipe up any water that has spilled.

Operations

WARNING!
Burn hazard!
Clothing can become very hot during and after ironing, and
may cause burns.
− To avoid risk of burns, do not touch the clothes immediately
after ironing.

Setting the temperature

NOTICE!
Risk of damage!
If you adjust the temperature during use, you may damage
your clothing if you use the iron immediately afterwards.
− Wait approximately two minutes before continuing with
the ironing to avoid damaging your clothing.
The temperature will remain constant while the steam iron is in use.
Refer to the table below for a temperature settings guide for different types
of fabric. Always pay attention to the information on the care label of your
clothing.
15
to fill the water tank
Operations
1
to open it
10
with tap
17