Technical Data; Noise And Vibration Information - MIRKA DEROS 650CV Instrucciones De Manejo

Technical Data

MIRKA® DEROS
Power
Mains Voltage
Speed
Orbit
Size of backing pad
Weight
Degree of protection

Noise and Vibration Information

Measured values are determined according to EN 60745.
MIRKA® DEROS
Sound pressure level Lpa
Sound power level Lwa
Sound measurement uncertainty K
Vibration emission value ah*
Vibration emission uncertainty K*
Specifications subject to change without prior notice.
* The values stated in the table are from laboratory testing in conformity with stated codes, standards and
are not sufficient for risk evaluation. Values measured in a particular work place may be higher than the
declared values. The actual exposure values and amount of risk or harm experienced to an individual is
unique to each situation and depends upon the surrounding environment, the way in which the individual
works, the particular material being worked, work station design as well as upon the exposure time and
the physical condition of the user. KWH Mirka, Ltd. cannot be held responsible for the consequences of
using declared values instead of actual exposure values for any individual risk assessment.
Further occupational health and safety information can be obtained from the following websites:
http://europe.osha.eu.int (Europe) or http://www.osha.gov (USA)
650CV
350 W
220 - 240 VAC
4,000 - 10,000 rpm
5.0 mm
Ø 150 mm
1010 g
I
650CV
71 db (A)
82 db (A)
2.0 db
3.4 m/s 2
1.5 m/s
2
6
5650CV
350 W
220 - 240 VAC
4,000 - 10,000 rpm
5.0 mm
Ø 125/150 mm
1010 g
I
5650CV
71 db (A)
82 db (A)
2.0 db
3.4 m/s 2
1.5 m/s
2