MIRKA DEROS 650CV Instrucciones De Manejo página 7

Proper Use of Tool
This sander is designed for sanding all types of materials i.e. metals, wood, stone, plastics, etc. using
abrasive designed for this purpose. Do not use this sander for any other purpose than that specified
without consulting the manufacturer or the manufacturer's authorized supplier. Do not use backing pads
that have a working speed less than 10,000 RPM free speed. Only use MIRKA backing pad 150mm (6")
Code: 8292605011, 125mm 130g (5") Code: 8292502511 that are designed for optimal performance with
the brake seal. Never mount a backing pad without distance washer. Other backing pad may reduce
performance and will increase vibrations. The cooling air vents on the housing must always be free
of blockages and clean to ensure air circulation. Any maintenance or repair work requiring the motor
housing to be opened may only be carried out by an authorized service center.
Work Stations
The tool is intended to be operated as a hand held tool. It is always recommended that the tool should be
used when standing on a solid floor. It can be in any position but before any such use, the operator must
be in a secure position having a firm grip and footing and be aware that the sander can develop a torque
reaction. See the section "Operating Instructions".
How to Get Started
Unpacking, check that the tool is complete without any transport damages. A damaged tool shall not be used.
Before using, check that the pad are correctly mounted and tightened. Connect the power cord to the
sander. Connect the power cord to a grounded outlet (220-240VAC, 50Hz).
In order to take the full power out of this tool it is recommended to use it together with the Mirka vacuum
cleaner 912/915 (or other suited dust extraction unit) and Mirka Net Sanding products. The combination
of MIRKA sanders, net sanding products and Mirka vacuum cleaner are the base of MIRKA dust-free
sanding solutions.
The power cord from the sander is in this application connected to the mains supply in the front of the
vacuum cleaner. By connecting the sanders power cord to the outlet on the vacuum cleaner makes it
possible to use auto-start function on vacuum cleaner.
7