Ez Mounting Frame - Fantech ProPLUS Serie Manual De Instalación

6
The ducting from this fan to the outside of the building has a strong effect on the air flow, noise and energy use of the fan. Use the
shortest, straightest duct routing possible for best performance, and avoid installing the fan with smaller ducts than recommended.
Insulation around the ducts can reduce energy loss and inhibit mold growth. Fans installed with existing ducts may not achieve their
rated air flow.
Assembly
Please remove duct assembly and blower assembly before installation.

EZ mounting frame

1. Install EZ Mounting Frame
2. Install Duct And Housing
Attach duct assembly to frame using provided (1) 1/4" screw. Before
inserting the housing, first pull the locking tab located opposite of the
duct collar and push housing into the frame. Release the locking tab
so that it temporarily holds the housing in place. To secure permanently
in place, use the remaining (2) 1-inch screws as shown in the illustration.
3. Install Blower Assembly (Only necessary if installing a contractor pack)
Install blower assembly in housing and secure with screws.
fantech
Housing Duct Assembly
Tab
slot
Tab
hole
hole hole
Blower Assembly
Tab