Weighing An Animal; Maintenance And Care - Tru-Test S3 Guia De Inicio Rapido

Weighing an animal

5
Check that the indicator is zeroed before you begin weighing. If not, press
If you are using Data Link to record weights, open the app on your mobile device or
PC and connect to the indicator.
If the indicator is not displaying 0 kg (0 lb) between animals or there are
problems with inaccurate or unstable weights, make sure that the bars
are firmly secured to the concrete floor and free from stones or dirt, and
that the load bars are properly connected to the indicator.

Maintenance and care

6
Do not leave the indicator or indicator connectors immersed in water.

Remove dust and moisture from the plugs using methylated spirits, ethyl alcohol,

or a suitable electrical contact cleaner. Stronger spirits must not be used, as they
may react with the plastic.
on the indicator.
1. Start a new session and name it.
2. Move the animal onto the platform.
3. When the weight has stabilised, press
weight.
4. When the weight is recorded, move the animal off the
platform and wait for the weight to return to zero.
to record the
9