Weighing An Animal - Tru-Test S3 Manual Del Usuario

5

Weighing an animal

Check that the indicator is zeroed before you begin weighing. If not, press
If you are using Data Link to record weights, launch Data Link on your mobile device
or Windows* computer and connect to the indicator.
If the indicator is not displaying 0 kg (0 lb) between animals or there are
problems with inaccurate or unstable weights, make sure that the bars
are firmly secured to the concrete floor and free from stones or dirt, and
that the load bars are properly connected to the indicator.
on the indicator.
1. Start a new session and name it.
2. Move the animal onto the platform.
3. When the weight has stabilised, press
weight.
4. When the weight is recorded, move the animal off the
platform and wait for the weight to return to zero.
to record the
9