Stopping Play; Volume Adjust; Every Channel Adjust; Reverbration Mode Select - Clatronic DVD 569 HC Instrucciones De Servicio

DVD 569 HC - GB 28.08.2003 10:52 Uhr

Stopping play

Press STOP
For you convenience:
Memory Stop. DVDs can utilize a function called Memory
Stop. This allows you to temporarily stop a movie and re-
start it from the same point later. While playing a disc,
pressing STOP button once will set the player into
Memory Stop mode. At this point, pressing PLAY button
re-starts the movie from the same point. Pressing STOP
button a second time will stop the disc completely (i.e. the
Stop Memory is lost). Note that some DVD discs will not
allow the use of Memory Stop.

VOLUME ADJUST

Turn the Volume knob by the front cabinet unit or press
VOL+,– button on the remote control unit to adjust volume.
The volume level is showed from MIN 0 to MAX 50 on the
VFD screen. The volume of this unit is set to 25, once the
power is ON.

EVERY CHANNEL ADJUST

Press LEVEL button on the remote control unit, it shows
circularly on the VFD screen as fellows:
V-FL
,
n
V-SW
%
When one item is showed on the VFD, press VOL+,–
button to adjust its level. There are ten levels up and do-
wn for every channel volume level.

Reverbration mode select

Press TONE button on the remote control unit, it shows
circularly on the VFD screen as fellows:
OFF , CONCERT ,
n
CHRCH ARENA
%
• The adjustment of tone can be memorized after the
power is turned off. The function is unactivated in the
TUNER status.

EQ function

When playing, press EQ button on the remote control
unit, VFD screen Display as follow:
SOFT NONE
,
n
CLASSIC % TENCO
The adjustment of EQ can be memorized after the power
is turned off.
The function is unactivated in the TUNER status.
Seite 27
V-FR V-LS
,
!
V-C V-RS
%
LIVING HALL
,
!
CAVE BATH
% %
ROCK POP
, ,
!
DACE LIVE
% %

Skipping + or -

Skipping +
Press SKIP+ button on remote control unit or press
NEXT button on the front-cabinet unit during play.
A chapter (DVD) or a track (CD) is skipped each time the
button is pressed.
Skipping –
Press skip- button on remote control unit or press PREV
button on the front-cabinet unit during play.
When the button is pressed once midway through a
chapter/track, a chapter/track will be skipped to previous
chapter/track each time the button pressed.

Fast FWD/RWD

Using either the Remote Control, press FAST FWD ( )
or FAST RWD ( ) during play.
>>X2
For you reference:
Press FAST FWD or FAST RWD button once, the disc
will be played forward or backward at double (x2) speed.
With each subsequent press, the disc will be played back
at x4, x8, x16 or x32 speed and PLAY. Press PLAY button
to return to normal play.

Pause/Step picture

Press PAUSE/STEP during play.
II
For your reference:
• When playing, pressing the PAUSE button pause
playback. Press the PAUSE button again to enter step
status. The picture will go ahead frame by frame.
To return to normal play, press the PLAY button.

SLOW PLAY

Press SLOW button when playing, you can play the disc
ahead or back at 1/2, 1/4, 1/8,1/16 of normal speed.
If you want stop it, you can press PLAY button to play
normally again.

MENU and TITLE

Press MENU or TITLE by the remote control unit
• DVD discs usually are divided into several titles and
subdivided into chapters.
• Press TITLE on the remote and the disc playing will
automatically return to the title program. Press the
CURSOR buttons on the remote to select the option,
then press ENTER button to play it. Note it is possible
that some DVD discs will not have this function.
• Press MENU button on the remote, the disc playing
will automatically return to the chapter menu. Press
CURSOR buttons on the controller to select chapter
and then press the ENTER button to play.
>>X8
II
27