Specifications - Samson MIXPAD MXP124 El Manual Del Propietario

Specifications

Frequency Response (Trim @ Min, unity gain ± 3 dB)
Mic to Main
Line to Main
Aux Return to Main
Line to Aux Send
T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 kHz LPF)
Mic/Line to Main (Mono Ch)
Line to Main (Stereo Ch)
Line to Aux Send
Equivalent Input Noise ("A" filter on, input shorted)
Mic (Trim @ Min, Fader set "0")
Line (Trim @ Min, Fader set "0")
Maximum Voltage Gain
Mic to Main
Line to Main (Mono Ch)
Line/Tape to Main (Stereo Ch)
Mic to Aux Send
Line to Aux Send (Stereo Ch)
Residual Noise (30 kHz LPF, all control Min)
Main (All fader min)
Aux Send (All fader min)
Crosstalk (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch ( Trim @ min,Fader set 0)
Input vs. Output
PEAK Indicators
Mic (Mono Ch)
Line (Stereo Ch)
Headphone output (600 ohm load)
Maximum Input Level (1 kHz, ± 3dB)
Mic Input (Mono Ch)
Line Input (Mono Ch)
Input Channel Equalizer (± 3dB)
High
Mid
Low
MXP124/MXP124FX
20Hz~30KHz
20Hz~30KHz
20Hz~30KHz
20Hz~30KHz
<0.03%
<0.03%
<0.03%
< -90dB 20HZ~30KHZ A-weighted
< -90dB 20HZ~30KHZ A-weighted
63dB
39dB
26dB
63dB
29dB
-105dBu A-weighted
-94dBu A-weighted
>75dB A-weighted
>60dB A-weighted
+16dBu
+16dBu
+20dBu
+16dBu
+40dBu
±15 dBu
±15 dBu
±15 dBu
19