Important Information; Maintenance - SKF TMEH 1 Instrucciones De Uso

5.

IMPORTANT INFORMATION

For the best results please ensure these guidelines are adhered to:
1. The OilCheck is very sensitive to moisture. Ensure that the
surface of the sensor is dry and that the unit is not used in
conditions of high humidity, snow, rain or fog.
2. Extremes of temperature will also affect the results, ensure that
the unit is calibrated at the ambient temperature at which the
tests will be conducted. Normal operating temperature is between
5 °C - 25 °C.
3. Ensure that the sample taken from the engine does not pick up
contamination from airborne particles or moisture. Use a vacuum
sampler if available.
4. Treat the surface of the sensor with care as excessive scratching
and abrasion of the tracks will damage the product.
5. The unit can not be used for fire resistant fluids (water-in-oil-
emulsion).
6.

MAINTENANCE

Keep the instrument clean and do not allow the instrument to get wet.
If the instrument is dropped or hit the device should be re-calibrated
to re-check its performance. To replace the battery remove the 2
screws holding the battery cover in place.
SKF TMEH 1 OilCheck 11