Using The Hand Blender - Imetec L3701 Instrucciones De Uso

WARNING! Comply with the indications in the chapters
"Contact with food" and "Quantities and times".
WARNING! This appliance is not to be used if it has been
dropped or if there are visible signs of damage.
WARNING! Unplug the appliance from the mains supply
before changing any accessory.
WARNING! DO NOT touch the moving parts.
• Insert solid and liquid food in a container.
• Connect the power cable plug to the power socket in the wall.
• Insert the stem until the blades are completely inserted in the mixture.
• Press the start button to operate the appliance.
• At the end of the process, release the button and wait for the blades to come to a complete
stop.
• Remove the plug from the power socket.
• Clean any parts that come into contact with foodstuffs immediately as described in the
chapter 'Cleaning and care'.
USING THE MULTI-PURPOSE CHOPPER ATTACHMENT
WARNING! DO NOT use the chopper with liquids only.
WARNING! Risk of damage to the appliance. DO NOT insert
cheese rinds.
WARNING! Risk of contaminating the food. DO NOT place the
bowl in the microwave oven.
• Fit the blades in the chopper bowl [Fig. C].
• Fill the bowl with solid foodstuffs without exceeding the maximum level marking.
• Fit the lid [Fig D] on the bowl.
• Fit the hand blender motor unit into the fixture on the chopper lid [Fig. I].
• Connect the power cable plug to the power socket in the wall.
• Press the start button to operate the appliance.
• At the end of the process, release the speed button used and wait for the blades to come
to a complete stop.

USING THE HAND BLENDER

(IF APPLICABLE) (CODE DE 3010)
EN
14