Cleaning And Maintenance; Customer Support And Warranty - Imetec L3701 Instrucciones De Uso

Batidora de inmersión
Ocultar thumbs Ver también para L3701:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
• Remove the plug from the power socket.
• Clean any parts that come into contact with foodstuffs immediately as described in the
chapter 'Cleaning and care'.
WARNING! Always disconnect the appliance from the socket
before cleaning or performing maintenance.
EN
Clean the accessories according to the table indicated in the chapter Cleaning before using
for the first time.
• Wipe the motor unit with a dampened and thoroughly squeezed out sponge.
• Dry with a dry cloth.
Should one of the problems indicated occur, adopt the proposed solution:
The hand blender blades cause the
contents to spatter.
The packaging of the appliance is made of recyclable materials. Dispose of it in
accordance with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the crossed bin symbol on the appliance or its packaging indicates that the
appliance must be disposed of separately from other waste at the end of its useful
life.
The user must therefore take the appliance to an appropriate recycling centre for
electrical and electronic equipment. Alternatively, instead of handling the disposal,
the user can hand over the appliance to the retailer when a new, equivalent one
is purchased. The user can hand over electronic products measuring less than 25 cm to
retailers of electronic products having a sales area of at least 400 m² free of charge and
with no obligation to buy. Appropriate separate collection for the subsequent procedure for
the decommissioned appliance for recycling, which includes treatment and environmentally
friendly disposal helps prevent adverse effects on the environment and health and promotes
reusing and/or recycling materials that the appliance consists of.
This appliance is guaranteed for a period of 2 years from the date of delivery to the customer.
This will be taken to be the date indicated on the receipt or invoice (provided that it is clearly
legible), unless the customer is able to demonstrate that the product was effectively received
at a later date. In the event of defects existing prior to delivery, the appliance will be repaired
or replaced at no expense to the customer, depending on which of the two remedies is
deemed most appropriate by the manufacturer. The customer is required to notify an
authorised service centre of any defects within two months of discovering the defect itself.
This guarantee does not cover defects or damage to any parts caused by:
a. transport damage or damage caused by accidental falls,
b. incorrect installation or inadequate electrical system,
15

CLEANING AND MAINTENANCE

TROUBLESHOOTING
Control
DISPOSAL AT END OF LIFE

CUSTOMER SUPPORT AND WARRANTY

Function
Push the foot end the stem more deeply into the
ingredients.

Publicidad

Tabla de contenido
loading

Tabla de contenido