Technical Specifications - M-Audio M-Track duo Guia Del Usuario

Appendix (English)

Technical Specifications

All specifications are measured at 20 kHz bandwidth. Specifications are subject to change without notice.
Mic Input (balanced XLR)
Frequency Response
Signal-to-Noise Ratio
THD+N
Preamp EIN
Gain Range
Line Input (balanced 1/4" [6.35 mm] TRS)
Frequency Response
Sensitivity
THD
Gain Range
Instrument Input (unbalanced 1/4" [6.35 mm] TS)
Frequency Response
THD+N
Input Impedance
Gain Range
Main Outputs, L and R (impedance-balanced 1/4" [6.35 mm] TRS)
Frequency Response
Signal-to-Noise Ratio
THD
Max Output Level
Headphone Output (1/4" [6.35 mm] TRS)
Power
Frequency Response
THD+N
Signal-to-Noise Ratio
26
20 Hz – 20 kHz (+0.1 dB)
109 dB (A-weighted)
0.003% (min. gain, 0 dBu out, A-weighted)
-128 dBu (max. gain, 40 Ω source, A-weighted)
Direct Mono: 0 dB to +54 dB
Direct Stereo: 6 dB to +60 dB
20 Hz – 20 kHz (+0.1 dB)
-43 dBu
0.002% (min. gain, 0 dBu out, A-weighted)
Direct Mono: -10 dB to +44 dB
Direct Stereo: -4 dB to +50 dB
20 Hz – 20 kHz (+0.1 dB)
0.005% (min. gain, 0 dBu out, A-weighted)
1 MΩ
Direct Mono: -10 dB to +44 dB
Direct Stereo: -4 dB to +50 dB
20 Hz – 20 kHz (+0.1 dB)
109 dB (A-weighted)
0.002% (0 dBu out, A-weighted)
+4 dBu
60 mW/Ch, 32 Ω
20 Hz – 20 kHz (+0.5 dB)
0.02% (A-weighted)
100 dB (A-weighted)