Assembly; Assembly-Steps - Zipper Maschinen ZI-EWB500LI Instrucciones De Servicio

A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety note designed in this way indicates a potentially dangerous situation which, if
not avoided, may result in property damage.
Irrespective of all safety regulations, your common sense and your corresponding technical
suitability/training are and will remain the most important safety factor for error-free operation of the
machine. Safe working depends first and foremost on you!
12

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
12.1

Assembly-steps

Do not fully tighten all screws until assembly is complete.
1. step
2. step
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-EWB500LI-AKKU
CAUTION
NOTICE
NOTICE
ASSEMBLY
Assemble the left
(3) and right
handle (4) to the
frame (2) using
one screw (S)
and nut (M)
each.
Assemble the
support (5) to
the handles
(3,4) using
screws (S) and
nut (M).
20