KPS Multicheck6010 Manual De Usuario página 78

Multicheck6010
Step 2 Connect the appropriate test leads to the instrument and follow the connection diagram
shown in figure 4.27 to perform phase-neutral or phase- phase line impedance
measurement.
Step 3 Check for warnings displayed on the screen and check the online voltage/terminal
monitor before starting the measurement. If everything is ok and the
the TEST key. After performing the measurement, the results will appear on the display.
Figure 4 28: Example of line impedance measurement results
Displayed results:
Z Line impedance
ISC Prospective short-circuit current
Notes:
• The specified accuracy of the test parameter is valid only if mains voltage is stable during the
measurement.
Figure 4 27: Line impedance measurement
- 78 -
EN
is shown, press