KPS Multicheck6010 Manual De Usuario página 94

Multicheck6010
Step 3 To change customer ID, location ID or object ID, press the LEFT key. The following
screen will be displayed (Figure 7.3).
Use the ▲▼ navigation keys to choose the ID type and the ◀▶ navigation keys to change the
value of the ID.
Press the Exit/Back/Return key to return to the record screen without changing the IDs.
Press TEST to save the IDs in the actual record. These IDs will also be used for the following new
records.
Step 4 To store the result of last measurement, press TEST key. The following will be
displayed (Figure 7.4).
The record number will change from red to black letters. That means that this result will be saved
in memory as record 1.
Each single result can be shown in colored letters:
• Green: measured and passed
• Red: measured but failed
• Black: measured but not judged
In addition the blue function bar contains a colored field that shows the overall result of the mea-
surement:
• Green: measured and passed
• Red: measured but failed
• Brown: measured but not judged
Figure 7.3: ID editor
Figure 7.4: Saved results
- 94 -
EN