Safety Notes; Correct Use; Special Safety Instructions; Safety Information When Handling Petrol-Operated Machines - Rothenberger HD 11/90 Instrucciones De Uso

1.

Safety notes

1.1

Correct use

The high-pressure pipe cleaning devices must only be used to clean pipes, drains, downpipes,
house service connections and rain downpipes as well as for cleaning work in ducts with a
diameter of 40 – 150 mm and up to 30 metres in length or with a diameter of 40 – 250 mm and up
to 40 metres in length and for cleaning the surfaces of motor vehicles, machines, buildings and
floor plates.
The HD 19/180B high-pressure cleaner must only be used outdoors!!
1.2

Special safety instructions

It is essential to read and understand the general safety instructions in the Safety appendix (Page
38 and following)!
In accordance with DIN 1988-1 the devices must not be connected directly to the public drinking
water supply. According to the DVGW (German Technical and Scientific Association for Gas and
Water) short-term connection is, however, permissible if a return flow inhibitor with an aerator is
fitted in the inlet pipe.
Hose lines are to be guided in such a way that they are not pinched or damaged by bodies with
sharp edges. Extended tensile and bending stress to the hose lines is to be avoided.
The operator must ensure that the proper condition of the important parts and safety devices is
checked every time before the fluid spray gun is put into operation. Any faults are to be
remedied before start-up.
For pipe cleaning work do not switch on until the nozzle and the hose are inserted into the pipe.
Please also observe the "Guidelines for fluid spray guns" and "Safety of electric devices for
domestic use and similar purposes".
Never take in solvent-containing fluids such as paint thinner, petrol, oil or similar fluids. Observe
the information provided by the manufacturers of the additives. The seals in the device are not
solvent resistant. The atomised spray of solvents is highly inflammable, able to explode and toxic.
1.3

Safety information when handling petrol-operated machines

Please note! Be sure to read before use.
Please observe the attached instruction manual with safety information on the
petrol motor!
2.

Technical data

Item number
Flow rate (ltr/min.)
Max. working length
(mtr)
Max. operating pressure
(bars)
Motor
Speed (1tr/min)
Motor capacity (kW)
Current consumption
HD 11/90 HD HD 13/100 HD
7.6008 7.6020
11
10
90
230 V / 50Hz 230 V / 50 Hz
1400 1400
1,5
9,5A
ENGLISH
HD 17/190 HD
7.6070
13 17
20 40
100 190
400 V / 50 Hz
2800
2,3 5,0
13A 400V – 10,9A
3x230V–18,8A
HD 19/180B
7.6090
19
40
180
Honda, petrol
1800
8,1
-----
9