EN
4/ MAINTENANCE
An accurate maintenance guarantees good functioning and long-lasting performance.
Particular care is due to the grease filter.
The grease filter needs cleaning by regular hand-washing or in dishwashers, every two months
at least, or depending on its use.
If the appliance is used in the filtering version, the activated charcoal filter needs to be re-
placed periodically.
The metal anti-grease filters and active carbon filters are removed in a similar way. Open the
extractable panel and remove the front grill (Fig. 9). Rotate the lower part of the grill and suc-
cessively move it towards the right so as to extract it from its housing (Fig. 9 ).
Then extract the filters (Fig. 10), after removing the plastic stop by turning it 90°.
Tepid water and neutral detergents are recommended to clean the appliance, while
abrasive products should be avoided.
SUBSTITUTION Of THE LED LAMP
To substitute the LED lamp only in the freestanding version, remove the steel cover then,
whether the freestanding version or the built-in version remove the cover of the LED lamp
compartment as indicated in Fig. 11A.
Support the LED lamp from underneath and remove the two fixing screws indicated in Fig. 11B.
The LED lamp must be removed from the lower part of the appliance (Fig. 11).
Substitute it with an original spare part and replace the removed components.
The power cord shall be replaced by authorized personnel only.
23