Introduction - Samson XM410 Manual Del Usuario

Introduction

Congratulations on your purchase of the Samson XM410 powered mixer! The XM410 is a six channel, 400 Watt
powered mixer with a built-in, 24 BIT DSP (Digital Signal Processor) effects. The XM410 will give you clean,
clear sound reproduction thanks to the high quality, low noise microphone preamps, super clean mix bus,
on-board 7-band graphic equalizer and the high output/low distortion power amplifier. For studio quality
processing, you can add one of the 100 dazzling digital effects including Delays, Chorus and lush Reverbs to
your voice or instruments. The XM410's ingenious Kickback enclosure allows you to tilt the unit back to see,
and operate, the controls with ease. The unit is easy to transport with its compact size and oversized, sure-grip
handle. The super-tough ABS construction ensures reliable, high quality sound from venue-to-venue and
performance-to-performance day in, and night out. Optimized for live sound reinforcement and commercial
installations, the XM410 is an ideal mixer and power amp solution offering big sound in a compact package.
In these pages, you'll find a detailed description of the features of the XM410 powered mixer, as well a descrip-
tion of its front and rear panels, step-by-step instructions for its setup and use, and full specifications. You'll
also find a warranty card enclosed—please don't forget to fill it out and mail it in so that you can receive
online technical support and so we can send you updated information about these and other Samson prod-
ucts in the future. Also, be sure to check out our website (www.samsontech.com) for complete information
about our full product line.
With proper care and adequate air circulation, your unit will operate trouble free for many years. We recom-
mend you record your serial number in the space provided below for future reference.
Serial number: ___________________________
Date of purchase: _________________________
Should your unit ever require servicing, a Return Authorization number (RA) must be obtained before ship-
ping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-
3SAMSON (1-800-372-6766) for a Return Authorization number prior to shipping your unit. Please retain the
original packing materials and if possible, return the unit in the original carton and packing materials. If you
purchased your Samson product outside the United States, please contact your local distributor for warranty
information and service.
1