IRUDEK LIGHT PLUS 1 Instrucciones De Uso página 18

Seat harness ( EN 813: 2008 )
Step 8 : Place the work positioning belt around the waist with
the confort pad at the back and D ring in the ventral part.
The seat harness is intended to be used in work positioning,
restraint and rope access systems when a lower anchor point
is required.
Before first use, the user should perform a suspension test in
a safe place to make sure the harness is the right size, the fit
is sufficient and that provides an acceptable comfort level for
the conditions of use provided.
rescue harness ( EN 1497: 2007 )
Step 9: The "D" ring located on the evacuation belt or the
textile shoulder evacuation rings are only for connection to
rescue teams during a rescue operation. It should not be used
as a fall arrest. In the case of textile rings, an evacuation belt
(Boomer) must be attached
The rescue harness is intended to be carried out during normal
work activities and the user should carry out a suspension
test in a safe place before using the rescue harness for the
first time, to ensure that it is the correct size, It has sufficient
fit and its comfort level is acceptable for the intended use.
MATERIAL
The full body harness is manufactured from 44 mm polyester
webbing.