Technical Specifications - Redstone RS 976PB Instrucciones De Uso

II - Technical specifications
Model:
▪ Power input
▪ No load belt speed
▪ Sanding area
▪ Belt size
▪ Weight (EPTA Procedure 01/2003):
▪ Safety class (EN 60745)
Noise and vibration information
▪ Noise emission (measured values determined according to EN 60745):
A-weighted sound pressure level L
Uncertainty К
pA
A-weighted sound power level L
Uncertainty К
wA
Wear hearing protection!
▪ Vibration emission (determined according to 6.2.7 EN 60745-1):
Total vibration values (vector sum in the three axes) determined according to EN 60745
Vibration emission value a
Uncertainty K
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce the
harmful effect of vibrations.
Dust from material such as paint containing lead, some wood species, minerals and metal may be harm-
ful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the
operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction
with additives for wood conditioning (chromate, wood preservative). Material containing asbestos must
only be treated by specialists.
▪ Where the use of a dust extraction device is possible it shall be used.
▪ To achieve a high level of dust collection, use vacuum cleaner for wood or for wood and/or minerals
together with this tool.
▪ The work place must be well ventilated.
▪ The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
12
EN
pA
wA
h
RS 976PB
900 W
160–340 m/min
76 x 130 mm
76 x 533 mm
3.4 kg
II
84.0 dB(A)
3.0 dB
95.0 dB(A)
3.0 dB
2
2.138 m/s
2
1.50 m/s
RS 976PB