Securing The Tv To The Wall - Samsung 7 Serie Manual De Usuario

To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto
the wall. Confirm that the screws have been firmly installed
onto the wall.
You may need additional material such as an anchor
✎
depending on the type of wall.
Since the necessary clamps, screws, and string are not
✎
supplied, please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the
screws into the clamps, and then fasten the screws onto the
TV again.
Screws may not be supplied with the product. In this
✎
case, please purchase the screws of the following
specifications.
Screw Specifications
✎
• For a 26 inch: M4
• For a 32 – 40 inch: M6
• For a 46 – 60 inch: M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then
tie the string tightly.
Install the TV near to the wall so that it does not fall backwards.
✎
It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the
✎
clamps fixed on the TV.
Untie the string before moving the TV.
✎
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for
failure. If you have any doubt about the security of your connections, contact a professional installer.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the
TV may cause the TV to fall. In particular,
ensure your children do not hang over or
destabilize the TV. Doing so may cause the
TV to tip over, causing serious injuries or
death. Follow all safety precautions provided
in the Safety Flyer included with your TV. For
added stability and safety, you can purchase
and install the anti-fall device as described
below.
English - 54
Wall