Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN Mounting instructions
Product description
EN
Figure :
Square service unit for dry-care floor coverings
on screed and for system floors, with floor cover-
ing cut-out for floor coverings of max . 15 mm
thickness . With cord outlet
in reomvable
1
hinged lid
for cable routing . With eight pre-
2
marked entry openings
for installation pipes
4
M20 or M25 . The frame
can be adjusted to
3
the top edge of the floor covering using four
height-adjustment supports
. The minimum
5
installation depth is 95 mm, the height adjust-
ment range +20 mm .
With pre-wired double socket
and strain relief .
6
Up to two modular data sockets (keystones) or
multimedia modules can be installed using an
optionally-available mounting support . With
steel plate as walk-on protection during mount-
ing
and mounting cover
.
7
8
Accessory: Strain relief (item no . 7408 650) .
23
Publicidad
Tabla de contenido
