EN Mounting instructions
Product description
EN
Figure :
Square service outlet for dry-care floor cover-
ings on screed and for system floors . Installation
housing with cord outlet
in the hinged lid
for
1
2
cable routing . With eight premarked entry open-
ings
for installation pipes (M25) . The frame
4
3
can be adjusted to the top edge of the floor cov-
ering using four height-adjustment supports
.
5
The minimum installation depth is 95 mm, the
height adjustment range +20 mm .
With pre-wired double socket
and strain relief .
6
Up to two modular data sockets (keystones) or
multimedia modules can be installed using an
optionally-available mounting support . With
mounting cover
.
7
Accessory: Strain relief (item no . 7408 650) .
21